Martial arts uniform supplier for UAE gyms and brands: custom BJJ gis, MMA and boxing gear from Pakistan, UAE import duty and VAT, shipping and ordering.
Custom Gym Merchandise: Hoodies, T-Shirts & Tracksuits for Martial Arts Gyms
Custom gym merchandise guide for BJJ, MMA and boxing gyms: best-selling products, fabric weights, print methods, size runs and how to launch your merch.
Muay Thai Shin Guards Buying Guide: Styles, Materials & Sizing
Muay Thai shin guards buying guide: full instep vs shin-only vs slip-on, leather vs PU, padding, sizing chart and how to order custom guards for your gym.
Types of Boxing Headgear: A Buyer’s Guide for Gyms and Brands
Types of boxing headgear compared: open-face, cheek-protector, full-face and competition guards, plus materials, foam, sizing and custom ordering tips.
IBJJF Gi Rules: Uniform & Belt Requirements Checklist (2026)
IBJJF gi rules explained: legal colours, fabric, collar 1.3 cm, sleeves within 2 cm of the wrist, pants length, patches and belt rules, with a checklist.
How Much Does a Custom BJJ Gi Cost? 2026 Price Breakdown
Custom BJJ gi cost explained: factory price, branding, samples, freight, duty and VAT, with an indicative budget for a first order of 50 gis from Pakistan.
Lightweight vs Heavyweight BJJ Gi — Which Should You Buy?
The single most common question from new BJJ students buying their first gi — and from brands designing their first OEM gi line — is whether to go lightweight or heavyweight. The answer depends on where you train, how you compete, and what you prioritise on the mat.
This guide breaks down every difference between lightweight and heavyweight BJJ gis so you can make the right call.
The Core Difference: GSM (Grams per Square Metre)
Gi weight is measured in GSM — the weight of the fabric per square metre. The higher the GSM, the heavier and more durable the gi.
| Category | GSM Range | Typical Use |
|---|---|---|
| Lightweight | 350–500 gsm | Hot climates, cutting weight, competition |
| Midweight | 500–600 gsm | All-round training, most common |
| Heavyweight | 600–750 gsm | Cold climates, guard passing drilling, longevity |
Note: GSM applies to the jacket fabric only. Pants are usually ripstop or cotton drill, which is much lighter regardless of jacket weight.
Weave Types and What They Mean for Weight
Weight is mostly determined by weave type (see our full BJJ gi fabric guide for more detail):
| Weave | Typical GSM | Feel | Durability | Most common in |
|---|---|---|---|---|
| Pearl weave | 450–550 gsm | Smooth, slightly stiff | Very high | Competition gis |
| Gold weave | 550–650 gsm | Softer, denser | Highest | Training gis |
| Double weave | 650–750 gsm | Thick, heavy | Extremely high | Grip training |
| Ripstop | Lightest | Very light, flexible | Moderate | Lightweight gis, pants |
| Single weave | 350–450 gsm | Light, less dense | Lower | Budget/beginner gis |
A pearl weave competition gi is the standard at most academies. A gold weave gi is heavier and typically used for training.
Lightweight BJJ Gis — Pros and Cons
Who should buy a lightweight gi?
- Competitors who are right at the edge of a weight class — a lighter gi can be several hundred grams lighter, which matters at weigh-ins
- Practitioners in hot climates — lighter fabric breathes better and dries faster
- Frequent travellers — lightweight gis pack smaller and weigh less in luggage
- Students training in poorly ventilated gyms or heated rooms
Pros of lightweight gis
- Easier to make weight for competitions
- Less heat retention during hard rolling
- Dries faster after washing
- Usually cheaper to produce (less fabric)
Cons of lightweight gis
- Easier to grip — less fabric resistance, so opponents get collar grips more easily
- Less durable — a light single weave will show wear faster than a heavier gold weave
- Can feel “flimsy” to practitioners used to heavier training gis
- Less forgiving of hard drilling and repeated drops
Heavyweight BJJ Gis — Pros and Cons
Who should buy a heavyweight gi?
- Practitioners who train in cold climates or unheated gyms — the extra mass retains warmth
- Students who want maximum durability — a heavy, dense weave lasts much longer under daily training
- Grapplers working on grip breaking and guard passing — the denser weave gives more realistic collar and sleeve resistance for drilling
- Gym owners buying school/loaner gis — heavyweight gis survive more washes and more bodies
Pros of heavyweight gis
- Exceptionally durable — withstands many wash cycles without breaking down
- More grip resistance — harder to grab, better for defence drilling
- Better warmth in cold environments
- Feels solid and structured on the mat
Cons of heavyweight gis
- Noticeably heavier — relevant for competition weigh-ins
- Hotter in summer or warm gyms
- Takes longer to dry — needs proper airing to prevent mildew
- More expensive to produce and ship due to material cost and weight
Competition Rules: What Does IBJJF Allow?
The IBJJF does not set a maximum gi GSM. Its uniform rules do require:
- Cotton or cotton-like woven fabric
- Colour: white, royal blue or black, with top and pants the same colour
- Lapel no thicker than 1.3cm and collar no wider than 5cm
- Sleeves reaching to within 2cm of the wrist with the arm extended, and pants to within 2cm of the ankle bone
- No tears, fraying or significant holes
For competition, most competitors use pearl weave gis in the 450–550gsm range — light enough not to eat into the weight allowance but durable enough for tournament stress.
If you are close to a weight class limit, a lightweight gi can genuinely save you from cutting additional water weight. Always weigh yourself in your competition gi before the event.
Climate Guide: Which Gi Weight for Your Region?
| Region / Climate | Recommended weight | Weave suggestion |
|---|---|---|
| Southeast Asia, Middle East | Lightweight (450–500gsm) | Pearl weave or ripstop blend |
| Brazil, Australia (coastal) | Lightweight–Midweight | Pearl weave |
| UK, Northern Europe | Midweight–Heavyweight | Pearl weave or gold weave |
| Canada, Scandinavia | Heavyweight | Gold weave or double weave |
| USA (varies) | Midweight | Pearl weave |
| Air-conditioned gyms (any climate) | Midweight | Pearl weave |
For Academy Owners: What Weight Should Your School Gi Be?
If you are designing a custom academy gi or sourcing custom gear for your BJJ academy, a gold weave midweight (550–600gsm) hits the right balance for most academies:
- Durable enough to survive years of heavy training use
- Not so heavy that it restricts movement or overheats students
- Holds embroidery well — the denser the weave, the cleaner the logo looks
- Mid-price point — not as cheap as single weave, not as expensive as double weave
For competition lines (gis you sell as a brand, not just use at your academy), pearl weave in the 475–525gsm range is the market standard.
For Brand Founders: Designing Your First OEM Gi Line
If you are launching a BJJ gi brand, a common starting configuration is:
SKU 1 — Training gi: Gold weave around 580gsm, black or blue, triple-stitch construction, woven lapel label, embroidered patch. Positioned as the durable everyday gi.
SKU 2 — Competition gi: Pearl weave around 490gsm, white and blue, IBJJF compliant, lightweight design. Positioned as the competition-day gi.
Starting with two SKUs covers both buyer types without overcomplicating your first order. Once you know which sells faster, you expand that line. Our guide on how to start a BJJ gi brand walks through the full process.
Summary: Lightweight vs Heavyweight at a Glance
| Lightweight (≤500gsm) | Heavyweight (≥600gsm) | |
|---|---|---|
| Best for | Competition, hot climates, travel | Durability, cold gyms, drilling |
| GSM | 350–500 | 600–750 |
| Typical weave | Pearl weave, ripstop | Gold weave, double weave |
| Durability | Moderate | High |
| Grip resistance | Lower | Higher |
| Weight for competition | Better | Worse |
| Price | Lower–mid | Mid–high |
| Drying time | Fast | Slow |
Frequently Asked Questions
Q: Which is better for a beginner — lightweight or heavyweight?
A: A midweight pearl weave (475–525gsm) is the best choice for most beginners. It is durable enough to last through the first year of training and works for both training and entry-level competition.
Q: Does gi weight affect how fast I progress?
A: No — training quality and mat time determine progress, not gi weight. A poorly fitting gi can be a minor distraction, so check our BJJ gi sizing chart before ordering.
Q: Can I compete in a heavyweight gi?
A: Yes, as long as it meets IBJJF colour and construction requirements. Be aware that a heavy gi will eat more of your weight allowance.
Q: What is a “summer gi”?
A: A marketing term for a lightweight gi (typically ripstop or single weave) designed for hot-weather training. They are lighter and more breathable but wear out faster.
Q: How do I stop a gi from shrinking?
A: Pre-shrunk gis will have minimal shrinkage from the first wash. Non-pre-shrunk gis can shrink noticeably in the first few hot washes. Wash in cold water and hang dry — see our BJJ gi care guide.
Q: Is a heavier gi harder to choke with?
A: A denser, stiffer collar can feel different when applying collar chokes — some grapplers find it harder to get a deep grip. Most practitioners adapt quickly.
Q: What GSM do most professional competitors use?
A: Most IBJJF competitors use pearl weave gis in the 450–525gsm range. Heavyweight gis are mostly used for training.
Related guides: IBJJF gi rules checklist · custom BJJ gi cost breakdown
Custom OEM BJJ Gis in Any Weight — Onrox International
Whether you need a lightweight competition pearl weave or a heavy gold weave training gi with your brand on it, Onrox International produces both at our factory in Sialkot, Pakistan.
Get a Custom Gi Quote → | Our BJJ Gi Range → | OEM Manufacturing →
OEM BJJ Gi Manufacturer — Factory Direct from Sialkot, Pakistan
If you are looking for an OEM BJJ gi manufacturer to produce white-label or custom-branded gis for your gym, academy, or fight brand — this page covers exactly what you need to know about how OEM production works, what to expect from a factory in Sialkot, and why Onrox International is the preferred partner for brands sourcing from Pakistan.
What Does OEM Mean for BJJ Gis?
OEM stands for Original Equipment Manufacturer. In the context of BJJ gis, it means the factory produces the garment to your exact specifications — your branding, your labels, your colour choices, your patches — while you sell it under your own brand name.
There are three models your brand might use:
| Model | What it means | Best for |
|---|---|---|
| OEM (White Label) | Factory’s base gi design, your branding only | New brands, low budget, fast launch |
| Private Label | Modified factory design (colours, cut, weave) + your branding | Mid-stage brands wanting differentiation |
| Full Custom | Brand-new pattern, your own technical spec | Established brands, competition lines |
Most gym owners and fight brands starting out use OEM or private label production. Full custom is typically reserved for brands doing 500+ units per SKU. For a deeper comparison, read our guide to OEM vs private label BJJ gear.
Why Source OEM BJJ Gis from Sialkot, Pakistan?
Sialkot has been one of the world’s leading manufacturing hubs for martial arts and combat sports equipment for over 100 years, and produces a large share of global BJJ gi output.
Manufacturing advantages Sialkot offers:
- Labour expertise — multi-generational garment workers trained specifically in combat sports construction
- Raw material access — pearl weave, gold weave, and ripstop fabric available through local mills and suppliers
- Cost efficiency — production costs well below comparable factories in Brazil, Europe or the USA
- Duty-free access to the EU and UK — Pakistan exports to the EU under GSP+ and to the UK under the DCTS Enhanced Preferences scheme, meaning 0% import duty on qualifying textile products
- Established supply chains — thread, reinforcement tape, waistbands and embroidery units are all close to most factories
For BJJ brands selling into European or UK markets, the 0% duty angle alone represents significant landed cost savings. Read more in our guide to duty-free BJJ gear imports from Pakistan.
What Can You Customise in an OEM BJJ Gi?
At Onrox International, our OEM clients have full control over:
Fabric & Weave
- Pearl weave (450–550gsm) — the standard competition gi
- Gold weave (550–650gsm) — heavier, more durable, popular for training gis
- Double weave (650–750gsm) — thickest, hardest to grip, preferred for drilling
- Ripstop pants — standard, or pearl weave pants as an alternative
- Lightweight competition cut (around 450gsm) — IBJJF legal
Colour
- Competition white, royal blue, black (IBJJF compliant)
- Custom colours for academies (grey, navy, burgundy, camo prints)
- Sublimation printing available on ripstop-panelled gis
Branding & Labels
- Woven collar label (your brand name)
- Embroidered lapel patch (left chest or right chest) — see our custom BJJ patches and embroidery guide
- Rubber printed logo on pants waistband
- Embroidered knee patch
- Hang tag and size label in your brand identity
- Custom polybag or branded packaging box
Construction Options
- Triple-stitch reinforced seams (standard at Onrox)
- Double-pass stitching on the jacket lapel
- Reinforced gusset panel in the crotch area
- Reinforced collar construction
Sizes
- A0, A1, A1L, A1F, A2, A2L, A2H, A2F, A3, A3L, A3H, A4, A5, F1–F5 (female cut)
- Children’s M000–M4 — see our BJJ gi sizing chart
Minimum Order Quantities (MOQ)
| Production Type | MOQ |
|---|---|
| OEM white label (standard design) | 25 pcs per colour |
| Private label (modified design) | 50 pcs per colour |
| Full custom (new pattern) | 100 pcs per SKU |
| Academy pack (mixed sizes, one colour) | 25 pcs total |
For new brands, our OEM programme allows you to start with as few as 25 pieces — enough to test the market without committing to a large capital investment.
OEM Production Timeline
| Stage | Timeframe |
|---|---|
| Quotation & spec confirmation | 2–3 days |
| Fabric sourcing (if non-stock) | 3–5 days |
| Sample / pre-production sample | 10–14 days |
| Sample approval & revision | 2–5 days |
| Bulk production (25–100 pcs) | 15–20 days |
| Bulk production (100–500 pcs) | 25–35 days |
| Quality inspection & packing | 3–5 days |
| Shipping (air to EU/UK/USA) | 5–10 days |
Total from order confirmation to delivery: approximately 6–8 weeks for a new OEM client. Repeat orders with the same spec typically run in 4–5 weeks.
Quality Control at Onrox International
Every batch goes through three quality checkpoints:
- Fabric inspection — GSM weight verified, colour fastness checked before cutting
- In-line QC — stitching density, seam alignment and embroidery placement checked at the sewing stage
- Final inspection — finished garment check: dimensions vs. size spec, label placement and overall finish
We offer a third-party inspection option (SGS, Bureau Veritas or equivalent) at buyer cost for orders over 200 pieces.
IBJJF Compliance
Our competition-line OEM gis are produced to IBJJF uniform rules:
- Cotton or cotton-like woven fabric
- Colours: white, royal blue or black, with top and pants the same colour
- Lapel no thicker than 1.3cm and collar no wider than 5cm
- Jacket reaches the thigh
- Sleeves reach to within 2cm of the wrist with the arm extended, with a sleeve opening of at least 7cm
- Pants reach to within 2cm of the ankle bone
We can provide an IBJJF compliance checklist with every order if your brand requires it for customer-facing claims.
Packaging Options
| Option | Details |
|---|---|
| Standard polybag | Clear branded poly with your logo sticker |
| Branded box | Custom printed carton — MOQ 100 pcs |
| Hang tag | Custom printed card tag — no MOQ |
| Premium carry bag | Canvas or polyester gi bag with your logo — MOQ 50 pcs |
How to Get Started
Getting a quote takes less than 5 minutes:
- Contact us at sales@onroxint.com or through our quote request form
- Tell us: quantity, weave, colour, branding requirements, target market
- We send a quote within 24 hours
- Approve the quote → we produce a pre-production sample
- Approve the sample → bulk production begins
We offer free pre-production samples (buyer covers shipping) for orders confirmed above 100 pieces.
Frequently Asked Questions — OEM BJJ Gi Production
Q: Can I use my own fabric or do I have to use yours?
A: We source fabric for you as part of the OEM service. If you have a specific fabric requirement, we can accommodate it — the cost and lead time will be adjusted accordingly.
Q: Do you sign NDA agreements?
A: Yes. We sign a standard non-disclosure agreement before sharing production specs or designs. Your brand designs and patterns are kept confidential.
Q: Can you produce both gi jacket and pants in the same order?
A: Yes. All our OEM gis are supplied as a complete set (jacket + pants) unless you specifically request separates.
Q: Do you have a catalogue of base designs to choose from?
A: Yes — we have base OEM designs covering pearl weave, gold weave, ripstop, double weave and kids cuts. Contact us for the lookbook.
Q: What payment terms do you offer?
A: Standard terms are 50% deposit, 50% before shipment. Contact us to discuss payment methods for your order.
Q: Can you ship directly to Amazon FBA or our 3PL?
A: Yes. We ship to Amazon FBA warehouses, 3PL partners, and any freight forwarder you nominate.
Q: Are your gis legal for IBJJF tournaments?
A: Our competition-line OEM gis are made to IBJJF uniform rules, and we supply a compliance checklist. IBJJF does not certify manufacturers — compliance is checked at the event.
Q: Do you supply samples before bulk order?
A: Yes. We produce a pre-production sample for approval before any bulk run. Buyers cover sample shipping.
Related guides: custom BJJ gi cost breakdown · IBJJF gi rules checklist
Ready to Source Your OEM BJJ Gi?
Onrox International has been producing custom combat sports gear in Sialkot since 2010 and ships to 50+ countries.
Get a Free Quote → | View Our BJJ Gi Range → | How to Start a BJJ Gi Brand →
Related guide: before you request samples, read how to create a tech pack for custom BJJ gis — it covers fabric specs, size charts, artwork placement and a free checklist.
Related guide: buying in bulk for an academy or shop? Read wholesale BJJ gis: prices, MOQs and how to buy.
Custom Focus Mitts & Hook-and-Jab Pads Manufacturer Pakistan
Onrox International manufactures custom focus mitts, hook-and-jab pads, and punch focus pads in Sialkot, Pakistan — factory direct. We supply boxing gyms, Muay Thai academies, martial arts brands, and wholesale distributors with OEM punch pads in genuine leather or synthetic leather, with full custom branding.
What Are Focus Mitts?
Focus mitts (also called focus pads, punch mitts, or hook-and-jab pads) are padded targets worn by a trainer or partner to receive punches. They are used to develop a boxer’s or fighter’s accuracy, timing, speed, and combination work.
They are a core piece of equipment in boxing, Muay Thai, kickboxing, and MMA gyms, and are commonly ordered alongside boxing gloves and Muay Thai pads as a complete striking set.
Focus Mitt Types We Manufacture
Standard Curved Focus Mitts
The most popular design. A curved catch surface allows the trainer to angle the mitt toward the incoming punch for better catching and reduced wrist strain. Recommended for all-round boxing and combination work. Single strap closure or double strap (wrist + palm) options.
Flat / Straight Focus Mitts
Traditional flat surface. More commonly used in Muay Thai for straight punch drilling. Lighter weight, faster to move.
Hook & Jab Pads (Target Mitts)
A rounder, disc-shaped focus target. Larger striking surface — less precise but easier for beginners to catch punches. Often used in group fitness and kickboxing class settings.
Clapper Mitts
Open-back design that produces a loud clap on contact for timing feedback. Slimmer profile allows faster movement.
Mexican-Style Focus Mitts
Ergonomically angled to follow the natural wrist position. Extended wrist support for trainer comfort during long pad rounds.
Material Options
Genuine Leather Focus Mitts
- Full-grain or top-grain cowhide leather
- More durable — withstands heavy punch sessions over years of use
- Better feel and grip on the catch surface
- Slightly higher unit cost
Synthetic Leather (PU) Focus Mitts
- Cost-effective option
- Excellent colour consistency for branding
- Suitable for general gym use and group fitness
- Easier to clean
Both options available in all mitt types. MOQ: 10 pairs per style/colour (lower MOQ than gloves due to simpler construction).
Padding Specifications
Standard Foam Padding: Single-layer EVA foam. Adequate for general boxing coaching and beginner-to-intermediate use.
Layered Foam: Firm outer layer + softer inner layer. Reduces hand fatigue for trainers during long pad sessions. Recommended for professional gyms and coaching use.
Gel Layer (Premium): Thin gel insert behind the catch surface. Absorbs peak impact force. Preferred by professional trainers who hold pads for heavy hitters.
Branding & Custom Options
- Logo embroidery or heat-transfer print on catch surface or back panel
- Custom colour: base colour, trim colour, strap colour all individually specified
- Custom inner lining print
- Custom packaging and pair bags
- Can be ordered as a set with matching boxing gloves or Muay Thai pads
Trainer’s Guide: Curved vs Flat Focus Mitts
The most common question from gym owners ordering pads is whether to choose curved or flat.
Choose curved mitts if: your primary use is boxing combination work, you want to reduce trainer wrist strain during heavy rounds, your trainers hold pads for multiple clients per day.
Choose flat mitts if: your primary use is Muay Thai or straight-punch drilling, you want a lighter, faster-moving pad, you prefer a minimalist traditional feel.
Choose hook & jab target pads if: you run group fitness or kickboxing classes with large numbers of participants, you need durable pads that are easy to catch for less-experienced trainers.
Most gyms order a mix of curved mitts (for 1:1 boxing coaching) and target pads (for group classes).
Complete Striking Pad Sets — Bundle Orders
We manufacture the full range of punch pads and striking equipment. Many gym owners and brands order a complete set:
Boxing Gym Bundle: Focus mitts + boxing gloves + heavy bag gloves (all branded, matching colourway) Muay Thai Studio Bundle: Muay Thai pads + focus mitts + boxing gloves (all branded) MMA Academy Bundle: Focus mitts + MMA gloves + hand wraps (all branded)
Bundle orders may qualify for reduced per-unit pricing at 50+ total pieces.
Frequently Asked Questions
Q: What is the minimum order for custom focus mitts? A: 10 pairs per style and colour combination. Lower than our boxing gloves MOQ due to simpler construction.
Q: Can I order focus mitts and boxing gloves as a matching set? A: Yes — this is one of our most popular orders for gym branding. Same logo, same colourway across gloves and mitts.
Q: What is the difference between curved and flat focus mitts? A: Curved mitts angle the catch surface to meet the punch, reducing wrist strain for the trainer. Flat mitts have a traditional straight surface — faster to move, lighter, and preferred for Muay Thai straight-punch work.
Q: Do you make focus mitts in genuine leather? A: Yes. Top-grain cowhide leather is available on all mitt types.
Q: Can I get gel padding in the catch area? A: Yes. Gel insert padding is a premium option available on any mitt type.
Q: How long does production take? A: Sample: 7–10 days. Production: 25–35 days after sample approval.
Q: Do you ship worldwide? A: Yes. We ship to 50+ countries. UK and EU buyers benefit from Pakistan’s GSP+ status — 0% import duty on boxing equipment.
Q: Can you match my existing boxing glove branding? A: Yes. Send us your current gloves or the artwork file, and we will colour-match and logo-match the focus mitts to the same specification.
Onrox International — Custom Focus Mitts Manufacturer from Sialkot, Pakistan Get a Free Quote | View All Striking Equipment
Custom Grappling Shorts & Fight Shorts Manufacturer Pakistan
Onrox International manufactures custom grappling shorts, MMA fight shorts, and board shorts in Sialkot, Pakistan. We supply BJJ academies, MMA brands, gym chains, and wholesale distributors with factory-direct custom shorts featuring full sublimation print, stretch grappling panels, and your branding.
What Types of Shorts Do We Manufacture?
MMA Fight Shorts
The classic cut for no-gi MMA training and competition. Sits at mid-thigh. Features:
- Side slit or split hem for kicking range of motion
- Inner compression short or liner optional
- Hook-and-loop + drawstring waistband (dual closure for security in grappling)
- Sublimation print throughout
BJJ / Submission Grappling Shorts
Similar cut to MMA fight shorts but often shorter, with a higher side slit. Designed for floor grappling where shorts that bunch are a disadvantage. Options:
- Minimal side seam for maximum range of motion
- No side pockets (pockets catch grips)
- Reinforced inner seam
Board Shorts / Hybrid Shorts
Longer cut (knee length) in a boardshort style. Popular for surf & train crossover brands. Features:
- Velcro + drawstring closure
- Optional grappling stretch side panel
- Sublimation or reactive-dye print options
Compression / Spats (Under Shorts)
Full-length or short compression worn under fight shorts. See the rashguard article for full specifications.
Fabric & Construction
Shell fabric:
- Polyester or poly-satin for sublimation short styles
- 4-way stretch polyester for grappling-focused cuts
Stretch panels:
- Inner thigh stretch panel (4-way spandex) for full squat and guard play range of motion
- Side panel stretch inserts in board short styles
Waistband:
- Wide elastic internal waistband (4–5 cm)
- External drawstring with metal tips
- Hook-and-loop outer closure on MMA fight shorts and grappling shorts
Stitching:
- Triple-stitch on waistband attachment and inner thigh seams
- Flatlock on all seams that contact skin
Sublimation Print Options
All our grappling shorts and fight shorts are available with full sublimation print:
- All-over print, seam-to-seam on front, back, and side panels
- Pantone-matched colours
- Photographic detail, gradient effects, fine-line logos — all reproduced accurately
- Print does not crack or fade under normal use and washing
No-Gi Kit Bundles
We specialise in complete no-gi kit packages for academies and brands:
Standard No-Gi Bundle:
- Custom rashguard (long or short sleeve) + matching grappling shorts
- Unified sublimation design across both pieces
- 25 pcs minimum per bundle order
Academy Team Kit:
- Rashguard + shorts + spats in academy colours
- Player name and number on back of rashguard and waistband
- Bulk pricing for 50+ pc orders
Frequently Asked Questions
Q: What is the minimum order for custom grappling shorts? A: 25 pieces per design and size run.
Q: Can I order MMA fight shorts and grappling shorts in the same order? A: Yes. Different styles can be combined into one order, each with a 25 pc minimum per style.
Q: Do you offer stretch panels inside grappling shorts? A: Yes — 4-way stretch inner thigh panels are standard on our BJJ grappling shorts cut. They can be added to other cuts on request.
Q: Can I get a matching rashguard and shorts set? A: Yes. This is one of our most popular products. We produce unified sublimation designs across the rashguard and shorts for a professional team-kit look.
Q: What print method do you use for shorts? A: Full sublimation printing on polyester shell fabric. This gives all-over, fade-proof, crack-proof print.
Q: Do you make women’s cut grappling shorts? A: Yes. Women’s fit grappling shorts with higher waistband, shorter rise, and adjusted hip measurement are available.
Q: How long does production take? A: Sample: 7–10 days. Production: 2–3 weeks after sample approval.
Onrox International — Custom Grappling Shorts Manufacturer from Sialkot, Pakistan Get a Free Quote | View All No-Gi Gear
Related guide: see our grappling shorts size chart for waist, length and IBJJF rules.






